Case K0201090043100

K0201090043100
① Laser Cutting: Material is cut using Bystronic Diener 4000w laser cutting machines.
② Deburring: Handheld pneumatic flat grinders are used for deburring.
③ Bulge Formation: Special bulge molds are used for this process.
④ Counterboring: Drilling machines are utilized for counterboring, with a total of 4 Xihu-brand drilling machines available.
⑤ Bending: A 1.2m EKO bending machine is used for bending.
⑥ Riveting: Corresponding rivet molds are loaded into riveting machines, with a total of 4 riveting machines available.
⑦ Sandblasting and Oxidation: This process is outsourced.
⑧ Packaging: Packaging is performed according to specifications, with FQC conducting a full inspection before boxing.
⑨ Shipment: Products are stamped and stored in the warehouse after inspection by QA.

Send Email Details

Case K0201090044100

K0201090044100
① Laser Cutting for Material Preparation: A total of 5 Bystronic Diener 4000w laser cutting machines are used for laser cutting.
② Deburring: Handheld pneumatic flat grinders are used for deburring.
③ Bulge Formation: Special bulge molds are used for creating bulges.
④ Flanging and Tapping: Corresponding flanging molds are used for this process.
⑤ Bending: A 1.2m EKO bending machine is used for bending.
⑥ Welding: A total of 5 laser welding machines are used for welding.
⑦ (Note: This step is a repetition of step ⑤. If it's intended to list a different bending process, please provide details. For now, I'll assume it's a mistake and won't translate it separately.)
⑧ Riveting: Corresponding rivet molds are loaded into riveting machines, with a total of 4 riveting machines available.
⑨ Powder Coating: Handheld spray guns are used for powder coating.
⑩ Packaging: Packaging is performed according to specifications, with FQC conducting a full inspection before boxing.
⑪ Shipment: Products are stamped and stored in the warehouse after inspection by QA.

Send Email Details

Case K0201090047100

K0201090047100
① Laser Material Cutting: A total of 5 Bystronic Diener 4000w laser cutting machines are used for cutting materials.
② Deburring: Handheld pneumatic flat grinders are employed for deburring.
③ Flanging and Tapping: Corresponding flanging molds are used for this process.
④ Counterboring: A total of 4 Xihu-brand drilling machines are used for counterboring holes.
⑤ Bending: A 1.2m EKO bending machine is utilized for bending operations.
⑥ Riveting: Corresponding rivet molds are loaded into 4 riveting machines for riveting.
⑦ Welding: A total of 5 laser welding machines are used for welding tasks.
⑧ Powder Coating: Handheld spray guns are used for powder coating.
⑨ Packaging: Packaging is performed according to specifications, with FQC conducting a full inspection before boxing.
⑩ Shipment: Products are stamped and stored in the warehouse after passing the QA inspection.

Send Email Details

Case K0201090048100

K0201090048100
① Laser Cutting for Material Preparation: A total of 5 Bystronic Diener 4000w laser cutting machines are used for material preparation.
② Deburring: Handheld pneumatic flat grinders are employed for deburring.
③ Counterboring: A total of 4 Xihu-brand drilling machines are used for counterboring holes.
④ Bending: A 1.2m EKO bending machine is utilized for bending operations.
⑤ Welding: A total of 5 laser welding machines are used for welding tasks.
⑥ Powder Coating: Handheld spray guns are used for powder coating.
⑦ Packaging: Packaging is performed according to specifications, with FQC conducting a full inspection before boxing.
⑧ Shipment: Products are stamped and stored in the warehouse after passing the QA inspection.

Send Email Details

Case K0201090051100

K0201090051100
① Laser Material Cutting: A total of 5 Bystronic Diener 4000w laser cutting machines are used for material cutting.
② Deburring: Handheld pneumatic flat grinders are employed for removing burrs.
④ Bending: A 1.2-meter-long EKO bending machine is used for bending operations.
⑤ Counterboring: A total of 4 Xihu-brand drilling machines are used for counterboring holes.
⑥ Welding: A total of 5 laser welding machines are utilized for welding processes.
⑦ Powder Coating: Handheld spray guns are used for powder coating applications.
⑧ Packaging: Packaging is performed according to specifications, with FQC conducting a full inspection before boxing.
⑨ Shipment: Products are stamped and stored in the warehouse after passing the QA inspection.

Send Email Details

Case K0201090052100

K0201090052100
① Laser Cutting for Material Preparation: A total of 5 Bystronic Diener 4000w laser cutting machines are used for material preparation.
② Deburring: Handheld pneumatic flat grinders are used for deburring.
③ Counterboring: A total of 4 Xihu-brand drilling machines are employed for counterboring holes.
④ Bending: A 1.2-meter-long EKO bending machine is used for bending operations.
⑤ Welding: A total of 5 welding equipment using laser welding are utilized.
⑥ Spray Painting: Handheld spray guns are used for spray painting.
⑦ Packaging: Packaging is performed according to specifications, with FQC conducting a full inspection before boxing.
⑧ Shipment: Products are stamped and stored in the warehouse after passing the QA inspection.

Send Email Details